To give you better access under the truck these wooden ramps are a great help
I used a railway line sleeper, but I have seen a number of pieces of wood screwed together to get the same result
You will need a Chainsaw to get the job done
Dont worry about exact sizes, I made mine Approx 900mm long, 200mm wide, 4.5 Inches thick.
Start cutting your angle at roughly the halfway point (approx 450mm). Then cut it 10mm thick at the end because this is the part that is the most vulnerable and will probably chip over time
Make handles so you can carry it easily. Get a piece of rope and tie a knot at both ends. Secure in place with a screw and a washer.
Its as easy as that! You now have service ramps to make your life easier
The ramps can be used on a wide range of vehicles
NOTE Only use hardwood- wood that is capable of taking heavy weight